With a high-voltage RGB controller, you can directly connect this RGB High Voltage 230VDC LED Strip to the mains AC230V. It is a type of LED Strip lights without transformer. Thus this strip will save a lot of expense for you and your clients. It makes the installation super easy and very suitable for DIY projects.
| Model No. | UTFS-HV2835-96RGB |
| LED Qty: | 96pcs/m |
| Voltage: | DC230V |
| Wattage: | 10W/M |
| CCT: | RGB |
| CRI: | n.a. |
Traditional Low Voltage LED strip typically comes with 24VDC or 12VDC, which is 5m/reel. You have to use external LED drivers. However, you do not need any driver if you use this High Voltage RGB LED Strip which is LED strip lights without a driver/transformer, it is 50M per reel, and you can connect this whole strip to AC230V after connecting to a high voltage RGB controller. This will save you a lot of work and space.
This linear IC ensures the constant current on every LED on the LED tape. So you can see the strip’s brightness is the same from head to tail. This IC is also with over temperature protection. This makes the strip super stable, and you don’t have to worry about quality problems.
There is a fuse on each group of LEDs. This IC is with over voltage, over current, and short-circuit protection. This again increases the stability of the product.
Inside arc and outside square structure, strong pressure resistance. The silicone is UV resistant, high-temperature resistance, yellowing resistance, good heat dissipation, flame retardant, and good flexibility.
This cable is VDE certified, double insulation, is much safer and has an integrated waterproof IP66 design.
You can cut the strip every 50cm. It is so easy and very flexible for installation.
| Unitop Model No. | Color | WL | CRI | View Angle | Lumen LM/M | Efficacy LM/W | Working Voltage | Current (mA/M) | Power | Minimum Cutting Length | IP Rate |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UTFS-HV2835-96RGB | Red | 620-625nm | n.a. | 120° | 77 | 23 | 230VDC | 14 | 3.3W/M | 500mm | IP66 |
| UTFS-HV2835-96RGB | Green | 525-530nm | n.a. | 120° | 216 | 65 | 230VDC | 14 | 3.3W/M | 500mm | IP66 |
| UTFS-HV2835-96RGB | Blue | 462-467nm | n.a. | 120° | 41 | 12 | 230VDC | 14 | 3.3W/M | 500mm | IP66 |
| UTFS-HV2835-96RGB | RGB | 620-625nm, 525-530nm, 462-467nm | n.a. | 120° | 332 | 33 | 230VDC | 43 | 10W/M | 500mm | IP66 |
1. Suggested the installation of 230V LED strips to be made by the manufacturer, agent, or other qualified people.
2. Please study the above specification before installation.
3. The above data is based on our standard product. Please subject to your actual product data if there is a slight difference.
4. Any acidic or alkaline substance is forbidden.
5. No prior notice in case this product or specification is updated.
6. Unitop reserves the final right of explanation of the above specification.
No, you can’t. Because it is RGB color, you need to connect to a high voltage RGB controller before directly connecting to AC220-240V.
High Voltage 230V LED Strip Light, RGB, 10W, IP66
Red/Green/Blue/RGB
180lm/W High Density LED Strip, 80LEDs/M, 8mm PCB
