This flexible COB LED strip with 320 LEDs/M, 8mm width PCB belongs to our Basic Series which is the most cost-effective solution. If you are looking for the lowest prices, this can be the perfect solution. While low prices do not mean low quality, we also offer 3 years warranty for all our strips.
| Nr modelu. | UTFS-BSCOB320-2408 |
| Ilość diod LED: | 320pcs/m |
| Napięcie: | DC24V |
| Moc: | 4,5 W/M |
| CCT: | 2700K~6500K |
| CRI: | >90Ra |
Don’t want to see any light spots on LED strips? Why not try Unitop COB flexible LED strips? Even comparing with LED strips with SMD2110 LEDs, 700LEDs/M, you will see that the COB LED strip is much softer without any light spots.
The CRI of the COB LEDs we use is more than 90Ra. Thus, we call our COB LED strip a High CRI COB LED strip. Generally speaking, CRI(color rendering index) values of 90 and above are excellent. However, values below 80 are generally considered not good.
Want minimum yellow spots? Unitop COB LED strips have smaller viewing angles of yellow spots than other strips available in the market. You will feel more comfortable under such a humanistic lighting environment.
Don’t want to feel awful in lights? You need a higher color saturation strip LED COB. Thanks to the choice of the best phosphor and core band.
Chips are chosen based on minimum voltage current scope, and the used Phosphofor for each color temperature chip is from the same chip brand and type. This ensures all the strips which we provided with the same color. You will get even no complaints from your clients about the color difference.
Still, worry about the heat dissipation of the strips? Thanks to the Inverted COB Gold-Free Technology, the heat is released directly through the FPC, and you will feel cooler on COB LED strips than on common LED strips. Finally, there will be no complaints from your clients about LEDs burnt out due to heat problems.
The highest quality flexible circuit board(FPCB) is chosen to ensure no difference in brightness from the beginning to the end. Below you will see which types of FPCB we are using. You will feel assured about the quality of our strips.
There are minimum cutting lines and pads on the COB strips. As the distance between two LED chips is too close, we suggest you cut the COB strips while light on the strips with lower current. Typically DC12V COB LED strips can be cut every 25mm, while DC24V COB LED strip lights are cuttable every 50mm.
Not only the chips but also the silicone which we used shall be the best quality without light spots and uniform brightness. The silicone gel which is used has below advantages: soft, smooth, and strong adhesion. Low-quality silicone gel is fragile and easy to be separated from FPC.
Want waterproof-type COB LED strips? Try from Unitop, please. We have 4 types: IP65(Silicone Glue), IP66(Silicone Tube), IP67(Extrusion Molding), and IP68(Silicone Tube & Silicone Glue). With waterproof technology, you can use our COB strips in any situation you want. P.S.: Our best-seller Basic Series COB LED strips are currently available in IP20, IP65, and IP66.
| Nr modelu Unitop. | Kolor | CCT | CRI | Kąt widzenia | Lumen LM/M | Skuteczność LM/W | Napięcie robocze | Prąd (mA/M) | Moc |
|---|---|---|---|---|---|---|---|---|---|
| UTFS-BSCOB320-2408WW | Warm White | 2700K | ≥90Ra | 180° | 400 | 88.9 | 24VDC | 187.5 | 4,5 W/M |
| UTFS-BSCOB320-2408WW | Warm White | 3000K | ≥90Ra | 180° | 427.1 | 94.9 | 24VDC | 187.5 | 4,5 W/M |
| UTFS-BSCOB320-2408NW | Natural White | 4000K | ≥90Ra | 180° | 477.5 | 106.1 | 24VDC | 187.5 | 4,5 W/M |
| UTFS-BSCOB320-2408CW | Cool White | 6500K | ≥90Ra | 180° | 495 | 110 | 24VDC | 187.5 | 4,5 W/M |
1. Sugerowana instalacja Taśmy LED COB do wykonania przez producenta, przedstawiciela lub inne wykwalifikowane osoby.
2. Przed instalacją należy zapoznać się z powyższą specyfikacją.
3. Powyższe dane są oparte na naszym standardowym produkcie. Jeśli występuje niewielka różnica, należy wziąć pod uwagę rzeczywiste dane produktu.
4. Powyższe schematy pochodzą z naszego standardowego produktu. Jeśli istnieje niewielka różnica, należy zastosować się do istniejącego produktu.
5. Moc sterownika LED musi być co najmniej 1,2 razy większa od całkowitej mocy taśm LED używanych do zasilania.
6. Ze względów bezpieczeństwa nie należy podłączać pasków bezpośrednio do zasilania.
7. Wszelkie substancje kwasowe lub zasadowe są zabronione.
8. Brak wcześniejszego powiadomienia w przypadku aktualizacji tego produktu lub specyfikacji.
9. Unitop zastrzega sobie prawo do ostatecznego wyjaśnienia powyższej specyfikacji.
Because this series of strips are our most cost-effective version, if you are looking for the lowest prices, this can be the perfect choice for you.
COB LED Strip With 320LEDs/M, 10mm Width PCB
