Ultra Thin COB LED strip with 480LEDs/M, 6mm width PCB

This 24v COB LED strip light with 480 LEDs/M, 6mm width PCB belongs to our Ultra Thin Series COB LED strips. If you are looking for a super narrow flexible COB LED strip to use in a very small area, this can be the perfect choice for you.

Model No.UTFS-UTCOB480-2406
LED Qty:480pcs/m
Voltage:DC24V
Wattage:6W/M
CCT:2700K~6500K
CRI:>90Ra
COB LED Strip ultra-thin-480-6mm-4m

Unitop Ultra Thin Series COB LED strip has so many outstanding features including below:

No Lighting Spots:

Don’t want to see any light spots on LED strips? Why not try Unitop COB flexible LED strip. Even comparing with LED strips with SMD2110 LEDs, 700LEDs/M, you will see that strip LED COB is much softer without any light spots.

1. 2110 vs COB

High CRI More Than 90Ra:

The CRI of the COB LEDs which we are using are all more than 90Ra. Thus we also call our COB LED strip as High CRI COB LED strip. Generally speaking, CRI(colour rendering index) values 90 and above are considered to be excellent, however values below 80 are generally considered not good.

CRI comparison

Minimum Yellow Spots:

Want minimum yellow spots? Unitop COB LED strips have smaller viewing angle of yellow spots than other strips available in the market. You will feel more confortable under such humanistic lighting environment.

2. Yellow spot
2. Yellow spot 2

Color Purity:

Don’t want to feel aweful in lights? You need higher color saturation COB LED strip. Thanks to the choice of best phosphor and core band.

3. Color purity

Color Consistency:

Chips are chosen on the basic of minimum voltage current scope, and the used Phosphofor for each color temperature chip is from the same chip brand, also the same type. This ensure all the strips which we provided with same color. You will get even no complaint from your clients about color difference.

4. color consistency

Inverted COB Gold-Free Technology:

Still worry about the heat dissipation about the strips? Thanks to the Inverted COB Gold-Free Technology, the heat is released directly through the FPC, you will feel cooler on COB LED strips than common LED strips. Finally there will be no complaints from your clients about LEDs burnt out due to heat problem.

5. Inverted COB Gold-Free

Circuit Board(FPCB):

Highest quality flexible circuit board(FPCB) are chosen to ensure there is no difference in brightess from the beginning to the end. Below you will see which types FPCB we are using. You will feel assured about the quality of our strips.

6. FPCB

Cutting of COB LED strips:

There are clearly minimum cutting lines and pads on the COB strips. As the distance between two LED chips are too close, we suggest you cut the COB strips while light on the strips with lower current. Normally DC12V strips can be cutted every 25mm, while DC24V strips is cuttable every 50mm.

7. FPC cutting
12V vs 24V Cutting size

Best Quality Silicone:

Not only the chips but also the silicone which we used shall be the best quality without light spots and uniform brightness. The silicone gel which are using have below advantages: soft, smooth, and strong adhesion. Low quality silicone gel is fragile and easy to be separated from FPC.

9. Good quality silicone

Waterproof:

Want waterproof type COB LED strips? Try from Unitop please. We have 4 types: IP65(Silicone Glue), IP66(Silicone Tube), IP67(Extrusion Molding), and IP68(Silicone Tube & Silicone Glue). With waterproof technology, you will be able to use our COB strips in any situation you may want. P.S.: Currently our High Wattage Series COB LED strips are available in IP20, IP65, IP66 & IP67.

10. Waterproof
Unitop Model No.ColorCCTCRIView AngleLumen
LM/M
Efficacy LM/WWorking VoltageCurrent (mA/M)Power
UTFS-UTCOB480-2406WWWarm White2700K≥90Ra180°54991.524VDC2506W/M
UTFS-UTCOB480-2406WWWarm White3000K≥90Ra180°58998.224VDC2506W/M
UTFS-UTCOB480-2406NWNatural White4000K≥90Ra180°663.6110.624VDC2506W/M
UTFS-UTCOB480-2406CWCool White6500K≥90Ra180°68411424VDC2506W/M

Note:

1. Suggested the installation of COB LED strips to be made by the manufacturer, agent, or other qualified people.

2. Please study the above specification before installation.

3. The above data is based on our standard product. Please subject to your actual product data if there is a slight difference.

4. The above schematic diagrams are from our standard product. Please subject to your existing product if there is a slight difference.

5. The LED driver wattage must be at least 1.2 times the overall wattage of the LED strips used for the power supply.

6. For safety, do not connect the strips directly to the AC.

7. Any acidic or alkaline substance is forbidden.

8. No prior notice in case this product or specification is updated.

9. Unitop reserves the final right of explanation of the above specification.

We kindly suggest that you use below aluminum profiles, end caps, covers, mounting clips with this COB LED strip.

If you have any specific accessories requirements, please feel no hesitate to let us know.

Why do you call this strip “Ultra Thin Series COB LED strip”?

Because the PCB which we used on this COB LED strip is only 6mm width which is super narrow. There are always some areas which do not have too much space and you have to use very tiny COB LED strips. Then this is the perfect solution.

RELATED PRODUCTS

Interested? Get Free Quote Immediately!





    LATEST BLOG POSTS