This flexible COB LED strip with 320 LEDs/M, 8mm width PCB belongs to our Basic Series which is the most cost-effective solution. If you are looking for the lowest prices, this can be the perfect solution. While low prices do not mean low quality, we also offer 3 years warranty for all our strips.
| Model No. | UTFS-BSCOB320-2408 |
| LED Miktarı: | 320pcs/m |
| Voltaj: | DC24V |
| Watt: | 4.5W/M |
| CCT: | 2700K~6500K |
| CRI: | >90Ra |
Don’t want to see any light spots on LED strips? Why not try Unitop COB flexible LED strips? Even comparing with LED strips with SMD2110 LEDs, 700LEDs/M, you will see that the COB LED strip is much softer without any light spots.
The CRI of the COB LEDs we use is more than 90Ra. Thus, we call our COB LED strip a High CRI COB LED strip. Generally speaking, CRI(color rendering index) values of 90 and above are excellent. However, values below 80 are generally considered not good.
Want minimum yellow spots? Unitop COB LED strips have smaller viewing angles of yellow spots than other strips available in the market. You will feel more comfortable under such a humanistic lighting environment.
Işıklar altında kendinizi berbat hissetmek istemiyor musunuz? Daha yüksek renk doygunluğuna sahip bir şerit LED COB'a ihtiyacınız var. En iyi fosfor ve çekirdek bant seçimi sayesinde.
Chips are chosen based on minimum voltage current scope, and the used Phosphofor for each color temperature chip is from the same chip brand and type. This ensures all the strips which we provided with the same color. You will get even no complaints from your clients about the color difference.
Still, worry about the heat dissipation of the strips? Thanks to the Inverted COB Gold-Free Technology, the heat is released directly through the FPC, and you will feel cooler on COB LED strips than on common LED strips. Finally, there will be no complaints from your clients about LEDs burnt out due to heat problems.
The highest quality flexible circuit board(FPCB) is chosen to ensure no difference in brightness from the beginning to the end. Below you will see which types of FPCB we are using. You will feel assured about the quality of our strips.
There are minimum cutting lines and pads on the COB strips. As the distance between two LED chips is too close, we suggest you cut the COB strips while light on the strips with lower current. Typically DC12V COB LED strips can be cut every 25mm, while DC24V COB LED strip lights are cuttable every 50mm.
Not only the chips but also the silicone which we used shall be the best quality without light spots and uniform brightness. The silicone gel which is used has below advantages: soft, smooth, and strong adhesion. Low-quality silicone gel is fragile and easy to be separated from FPC.
Want waterproof-type COB LED strips? Try from Unitop, please. We have 4 types: IP65(Silicone Glue), IP66(Silicone Tube), IP67(Extrusion Molding), and IP68(Silicone Tube & Silicone Glue). With waterproof technology, you can use our COB strips in any situation you want. P.S.: Our best-seller Basic Series COB LED strips are currently available in IP20, IP65, and IP66.
| Unitop Model No. | Renk | CCT | CRI | Görüş Açısı | Lümen LM/M | Etkinlik LM/W | Çalışma Gerilimi | Akım (mA/M) | Güç |
|---|---|---|---|---|---|---|---|---|---|
| UTFS-BSCOB320-2408WW | Sıcak Beyaz | 2700K | ≥90Ra | 180° | 400 | 88.9 | 24VDC | 187.5 | 4.5W/M |
| UTFS-BSCOB320-2408WW | Sıcak Beyaz | 3000K | ≥90Ra | 180° | 427.1 | 94.9 | 24VDC | 187.5 | 4.5W/M |
| UTFS-BSCOB320-2408NW | Doğal Beyaz | 4000K | ≥90Ra | 180° | 477.5 | 106.1 | 24VDC | 187.5 | 4.5W/M |
| UTFS-BSCOB320-2408CW | Soğuk Beyaz | 6500K | ≥90Ra | 180° | 495 | 110 | 24VDC | 187.5 | 4.5W/M |
1. Kurulumunu önerdi COB LED şeritler üretici, temsilci veya diğer kalifiye kişiler tarafından yapılmalıdır.
2. Lütfen kurulumdan önce yukarıdaki özellikleri inceleyin.
3. Yukarıdaki veriler standart ürünümüze dayanmaktadır. Küçük bir fark varsa lütfen gerçek ürün verilerinize tabi olun.
4. Yukarıdaki şematik diyagramlar standart ürünümüze aittir. Küçük bir fark varsa lütfen mevcut ürününüze başvurun.
5. LED sürücü watt değeri, güç kaynağı için kullanılan LED şeritlerin toplam watt değerinin en az 1,2 katı olmalıdır.
6. Güvenlik için şeritleri doğrudan AC'ye bağlamayın.
7. Herhangi bir asidik veya alkalin madde yasaktır.
8. Bu ürün veya spesifikasyonun güncellenmesi durumunda önceden haber verilmez.
9. Unitop yukarıdaki şartnameye ilişkin nihai açıklama hakkını saklı tutar.
Because this series of strips are our most cost-effective version, if you are looking for the lowest prices, this can be the perfect choice for you.
COB LED Strip With 320LEDs/M, 10mm Width PCB
