In this article, we would like to share with you the 13 precautions for installation of Світлодіодна стрічкова лампа. Please read carefully before any installation.

13 Precautions for Installation of LED Strip Light

1. Storage demands of LED strip lights

The silica gel of LED lights has wetness absorption properties. The light strips ought to be saved in a dry as well as sealed atmosphere. It is advised that the storage space duration is not too long. Please utilize or reseal it in time after unboxing. Please do not unbox before usage.

2. Inspect the LED strips prior to power on

The whole roll of LED light strips need to not be invigorated to brighten without taking apart the coil, product packaging, or piled up in a ball, so regarding avoid major heat generation and also cause LED failure.

3. It is strictly prohibited to press the LED with hard and also sharp items

У "The LED strip lighting is LED light bonded on copper wire or adaptable PCBs. When the item is installed, it is advised not to push the surface of the LED straight with your fingers or hard items. It is strictly prohibited to tip on the LED strip lights, so as not to damage the LEDs and let the LED light not light up.

4. LED strip lights cutting

When the flex light strip is set up, according to the length of the site installment, if there is a cutting situation, the light strip ought to be cut from the location marked with the scissors icon on the surface of the light strip. It is strictly forbidden to cut the light strip from other locations without cutting marks, which will create the strips to not light up. After the water resistant LED strip light is cut, it needs to be waterproofed at the cut point.

5. Take note of the surface neat and neat before installation

Prior to setting up the LED lighting strip, please keep the installment surface area clean and also free of dust, so as not to affect the sticking of the light strip. When mounting the light strip, please do not detach the release paper on the adhesesive surface area at one time, so regarding prevent the light strips sticking to each other throughout installment and also create the LEDs to be damaged. You should tear off the release paper while installing. The surface area of the light strip setup system have to be flat, particularly at the light strip connection plate, so as not to cause the light strip to be prone to failing and unequal surface area light to influence the general impact.

6. Do not twist the light strip when setting up

Throughout the installation process, it is purely forbidden to twist the the Світлодіодна стрічкова лампа body to prevent breaking the LEDs or falling off the parts. Throughout the installation of the strips, it is purely restricted to use external pressure to pull, and also the tensile pressure that the light strip can withstand is ≤ 60N.

7. Pay attention to the arc of the corner during installation

Throughout the installing procedure of the гнучка світлодіодна стрічка, in order to guarantee the life and integrity of the light strip, please do not bend the product at an ideal angle. The curvature of the light strip ought to be higher than 40mm to avoid damages to the soldering and circuit board of the light strip.

8. It is purely forbidden to make use of acid sealant

According to authoritative tests, the gas or fluid volatilized by acidic adhesives as well as quick-drying adhesives during healing has a terrific effect on the service life and also luminescent effect of the LED light source. It is suggested not to make use of acid sealant when installing the LED ribbon strip.

9. Restriction of live work

У "The Світлодіодна стрічкова лампа is small single LEDs welded on the flexible printed circuit board with a special manufacturing process. After the strips are installed, it will be energized and lighted on, as well as it is generally utilized for ornamental lighting. The normal input voltages are 12V and 24V low-voltage. In order to avoid damages to the light strips because of carelessness in the installing process and also operation procedure, it is purely forbidden to run the light strips when installing light strips at the same time.

10. Do not install the LED strips in excessive hot environment

У "The Світлодіодна стрічка is a very fragile light source and should be handled with care. It is important to note that the LED strip should never be installed in an environment where excessive heat may occur. This is because of the high likelihood of the LEDs being damaged and thus preventing them from emitting light.

12. Do not install IP20 LED strip products in outdoor or wet location environments

Our standard LED tape light is IP20, if you need waterproof type, you can contact us easily to get IP65, IP67 or IP68 options.

13. Follow the local electrical regulation, best hire qualified licensed electrician for installation

It is important to follow local and national electrical regulations when installing LED flexible strips. Although the installation of LED flexible strip is quite easy, we highly recommend that you can hire a qualified licensed electrician to install them to achieve the best result.

In case you have further questions regarding Світлодіодна стрічкова лампа installation precautions, you can негайно зв'яжіться з нами for help!

90% of clients found this information practical before choosing LED strip lights

The use of Світлодіодні стрічкові світильники is swiftly climbing in contemporary lighting layout around the globe. Designers and illumination developers are executing LED strip lights right into residential, business, and commercial projects at an increasing rate.

There are numerous options on the marketplace for Світлодіодні стрічкові світильники (also called LED tape lights or LED flex ribbon) and also there is no specific standard for exactly how to pick LED strip lights. We have actually produced this overview to inform specialists and also novices alike.

New to LED strip lights?

Що таке світлодіодні стрічкові світильники?

Top 7 applications for LED flexible strips/LED tapelights

Important notice before getting your LED flex light project began: Obtain a clear vision initially!

There is no all-in-one service due to the fact that each job is special. Different projects need various types of Світлодіодні стрічки. Answer the concerns listed below in your head before beginning any kind of job. We’re below to walk through these with you also.

Application area of LED flex

• What type of area are you in? Residential, business, retail, outdoors?
• What especially will you be lighting?
• Where will it be mounted? Under cabinets, kickboards, coves, awnings and also eaves, backlighting, display cases, global space station?
• Will the lights be revealed to the fluids or aspects?
• What material will the strips be affixed to?

Features and aesthetic

• What total look do you wish to achieve?
• Do you desire accent illumination, task lighting, border lights, indirect lights, major lighting, specialty application, and so on
• What products or items am I lighting or utilizing the flexible lighting for?
• Do I need High CRI for high color rendering? (See below for description).
• Do you want the lights to give off a white light only? Solitary color like red, green, or blue? Have the capacity to change colors with a remote? Or have the capacity to transform the white outcome from warm to cool white with a controller?
• Are there other lights in the location and if yes, what colors are they?
• Do you wish to dim your lights or manage them with a remote or wall button?

Feelings

• What are the non-physical results you wish to accomplish?
• Do you intend to create a tranquility, sexy, energised, enthusiastic, risk-free, kicked back, vibrant, or fun environment?
• What do you desire your guests and also customers to state or assume when they enter your area?

Ready? Let’s Move!

Top 4 points you need to know prior to choosing LED flexible strip lights

1. Compare Lumen, CCT, as well as CRI (Color Rendering Index).

1.1 Lumen (Brightness).

Lumen is the measurement of brightness as viewed to the human eye. We are all accustomed to utilizing watts to measure the illumination of light due to the fact that of incandescent lights. Today, we use lumen. Lumen is the most important variable when selecting which LED strip light you require to consider. When contrasting lumen output from strip to strip, note that there are different methods of claiming the very same thing.

The concerns you should be asking is “Lumens per what? Per foot, reel, or meter? How long is the reel?”.

Different projects call for a particular amount of brightness to achieve a wanted appearance. Our recommendations is to constantly go brighter than required as well as include a dimmer. Running your LEDs below their full power and also illumination can also enhance life expectancy.

Below is a general guide. We are constantly offered to assist create your job with you.

Quick Guide by project

Accent Lighting as well as Mood Lights – 100 to 350 lumens per foot.
Under Cupboard Lights – 175 to 525 lumens per foot.
Task Lighting with reduced range from source of light – 280 to 437 lumens per foot.
Task Lighting with higher distance from source of light – 344 to 687 lumens per foot.
Indirect llumination in a bedroom/ hotel/ automobile/ entrance hall – 375 to 562 lumens per foot.
Industrial illumination/ signs/ tube substitutes – 500 to 950 lumens per foot.

1.2 CCT – Color Temperature.

CCT (Correlated Color Temperature level) refers to the shade temperature level of light, determined in levels Kelvin (K). A light resource that has a 2000– 3000 K ranking is seen as, what we call, cozy white light. CCT is specific to white light or rather, the shade temperature level.

” Can I purchase a 6000k light from amazon.com and also a 6000k light from you and they will look the same?” The response is fairly possibly no. All CCTs are not produced equivalent likewise. You might see that some lights that are “cool white” might not look pure white. They may emit a greenish, purplish, or bluish shade to them? This is because the LEDs have actually been picked from a bin that is much from true white. It is important to ask the maker of the LED strips how they BIN their LEDs and also what their selection process is.

Which color temperature should you select?

Right here is an instance of the very same kitchen under 3000k, 4200k, and also 6200k lights. Notice how lighting adjustments everything! The aesthetic, function, or feeling of an area might change relying on the shade temperature level you make use of. Select the CCT that’s right for you.

1.3 CRI – Color Rendering Index.

Color Rendering Index (CRI) determines how colors are properly provided under a light source in comparison to all-natural sunshine. The index is determined on a 0-100 scale with 100 being a best rating of color precision, meaning the colors appear as they naturally would under untainted daytime. High CRI illumination is chosen anywhere, however is specifically beneficial in. The bottom line: the greater the CRI, the better is the light source.This score is also a dimension in the lighting sector to help recognize naturalness, hue discrimination, intensity, choice, color naming precision, and also color harmony.

95 – 100 Ra

Sensational color rendering. Color appear as they should, refined tones pop out and also are accented, complexion look lovely, art comes to life, backsplashes and paint reveals it holds true gorgeous complete saturation. You need to see it to think it! Unitop LED flexible strips have CRIs as much as 98Ra as choices!

90 – 95 Ra

Great color rendering! Nearly all shades ‘pop’ as well as are easily appreciable. Significantly terrific lighting starts at a CRI of 90.

80 – 90 Ra

Good color rendering, where most colors are provided well. You may not see items as totally saturated as you would like, yet most people will not see.

60 – 75 Ra

Poor shade making. Things and also colors may look desaturated, drab, and also at times unidentifiable (can not see the difference in between black and navy colored socks).

See our High CRI LED Strip Lighting

2. Contrast LED strip dimension as well as number of LEDs on the strip.

Generally, Світлодіодні стрічкові світильники are packaged on a reel (roll) of 5 meters, or 16′ 5″. The machines used to “position as well as choose” the LEDs as well as resistors on the flexible circuit card are commonly 3′ 2″ in size, so private sections are soldered with each other to complete a whole reel. Make sure you are buying by the foot or by the reel if acquiring. Validate size prior to checking out.

Action the amount of feet you need of LED strips prior to you begin. This will make it easier to compare rate (after high quality is compared, obviously). Once you determine the variety of feet on the reel being sold, take a look at the amount of LED chips get on the reel and also the LED chip kind. This can be made use of to compare LED strips in between companies.

What do the numbers of the LED chips indicate?

When companies talk regarding LEDs, Below is an example of what the numbers suggest.

3. Wattage per strip of LEDs.

Power consumption is one of the factors we as a society have started switching over to LEDs. Power level informs us just how much power we are eating while these lights get on, and also consequently just how much we’ll need to pay at the end of every month. Once more, make sure to verify the electrical power per foot, meter, or reel before you get.

Some might read “24 watts” on a reel and afterwards get residence and understand this is per meter or per foot, suggesting the entire reel really makes use of a lot more. Making issues worse, they have actually gotten a power supply that covers 30 watts, assuming that would certainly be enough. When a seller doesn’t effectively list essential details in a very easy to check out format, this frequently happens.

Lastly, see to it you comprehend the voltage that your adaptable Світлодіодні стрічкові світильники make use of. An LED strip light that makes use of 24 volts will certainly not function if you acquire a 12-volt power supply, and also may result in risk of fire. You need to choose the proper power supply for your lights.

4. Proven Quality.

You are searching for a “set-and-forget” illumination system that can be made use of for many years to find. To make sure that your LEDs last their intended life expectancy, are risk-free around your house as well as organization, as well as don’t require extra maintenance expenses to replace, you need to confirm the quality insurance claims.

1. Thermal Administration – Heat = fatality to LEDs. Ask if as well as how the LED strip lights have actually been designed for appropriate thermal management as well as heat dissipation. If they have not, the LED’s 50,000+ hr LED chip life-span may drop to 10,000 or 20,000 hrs. This can be done on a chip degree as well as on a PCB degree. Do not exclusively rely on an aluminum warm sink to dissipate warm away from the LEDs. The product ought to be made at a part level to guarantee a longer life-span.

2. Color Quality and Accuracy – When you acquire a ‘3000K warm white’ LED strip light you must not expect to obtain a bright white shade from the LEDs. Ask for test reports that prove the color you are purchasing is what will certainly arrive.

3. Safety Certificates – It is tough to verify a seller’s safety and security insurance claims using Amazon or Ebay alone. Check the UL listing, REACH, or RoHS registry to make certain the LEDs are secure as well as do not have lead or other harmful products.

4. Product Quality – Item efficiency and durability is figured out not simply by the top quality of the LEDs, however the thickness as well as materials utilized in the PCB, resistors, wires, and also lead-free soldering.

5. Test Reports – This is necessary for you to verify the quality, brightness and other parameters of the products.

6. Warranty, Customer Service, as well as Installation/Design Support – We are right here to help create your project, no issue what the dimension. Our LED strip lights stand for the greatest high quality located on the market today, and will certainly be lighting your job location for lots of years to come.

Other factors to consider when choosing your LED strip lights:.

You require a product you can trust and will certainly produce a good tidy light for years to come and also conserve you money at the same time.

The LED market is very saturated with manufacturers and representatives supplying various degrees of top quality, expense, and specs. You need look out carefully before make your very own decision.

View all Unitop LED flexible strips.

Need aid with your task or picking the ideal flexible lights? Contact Us immediately!