This COB LED strip with 480 LEDs/M, 4mm width PCB belongs to our Ultra Thin Series COB LED strips. If you are looking for super narrow COB LED strip to use in very small area, this can be the perfect choice for you.
| Номер моделі. | UTFS-UTCOB480-2404 |
| Кількість світлодіодів: | 480pcs/m |
| Напруга: | DC24V |
| Потужність: | 4W/M |
| КТ: | 2700K~6500K |
| CRI: | >90Ra |
Don’t want to see any light spots on LED strips? Why not try Unitop COB LED strips. Even comparing with LED strips with SMD2110 LEDs, 700LEDs/M, you will see that COB LED strip is much softer without any light spots.
CRI світлодіодів COB, які ми використовуємо, перевищує 90 Ra. Таким чином, ми також називаємо нашу світлодіодну стрічку COB як світлодіодну стрічку COB з високим CRI. Взагалі кажучи, значення CRI (індекс кольоропередачі) 90 і вище вважаються відмінними, однак значення нижче 80, як правило, вважаються не дуже хорошими.
Want minimum yellow spots? Unitop 24v COB LED strip lights have a smaller viewing angle of yellow spots than other strips available in the market. You will feel more comfortable under such a humanistic lighting environment.
Don’t want to feel awful in lights? You need higher color saturation flexible COB LED strip. Thanks to the choice of the best phosphor and core band.
Chips are chosen on the basic of minimum voltage current scope, and the used Phosphofor for each color temperature chip is from the same chip brand, also the same type. This ensure all the strips which we provided with same color. You will get even no complaint from your clients about color difference.
Still, worry about the heat dissipation of the strips? Thanks to the Inverted COB Gold-Free Technology, the heat is released directly through the FPC, you will feel cooler on COB flexible LED strips than on common LED strips. Finally, there will be no complaints from your clients about LEDs burnt out due to heat problems.
Highest quality flexible circuit board(FPCB) are chosen to ensure there is no difference in brightess from the beginning to the end. Below you will see which types FPCB we are using. You will feel assured about the quality of our strips.
There are clearly minimum cutting lines and pads on the COB strips. As the distance between two LED chips are too close, we suggest you cut the COB strips while light on the strips with lower current. Normally DC12V strips can be cutted every 25mm, while DC24V strips is cuttable every 50mm.
Not only the chips but also the silicone which we used shall be the best quality without light spots and uniform brightness. The silicone gel which are using have below advantages: soft, smooth, and strong adhesion. Low quality silicone gel is fragile and easy to be separated from FPC.
Want waterproof type COB LED strips? Try from Unitop please. We have 4 types: IP65(Silicone Glue), IP66(Silicone Tube), IP67(Extrusion Molding), and IP68(Silicone Tube & Silicone Glue). With waterproof technology, you will be able to use our COB strips in any situation you may want. P.S.: Currently our High Wattage Series COB LED strips are available in IP20, IP65, IP66 & IP67.
| Номер моделі Unitop. | Колір | CCT | CRI | Кут огляду | Люмен LM/M | Ефективність LM/W | Робоча напруга | Струм (мА/М) | Влада |
|---|---|---|---|---|---|---|---|---|---|
| UTFS-UTCOB480-2404WW | Теплий білий | 2700K | ≥90Ra | 180° | 371 | 92.7 | 24 В ПОСТІЙНОГО СТРУМУ | 166.7 | 4W/M |
| UTFS-UTCOB480-2404WW | Теплий білий | 3000K | ≥90Ra | 180° | 401 | 100.2 | 24 В ПОСТІЙНОГО СТРУМУ | 166.7 | 4W/M |
| UTFS-UTCOB480-2404NW | Натуральний білий | 4000K | ≥90Ra | 180° | 437.6 | 109.4 | 24 В ПОСТІЙНОГО СТРУМУ | 166.7 | 4W/M |
| UTFS-UTCOB480-2404CW | Холодний білий | 6500K | ≥90Ra | 180° | 455.2 | 113.8 | 24 В ПОСТІЙНОГО СТРУМУ | 166.7 | 4W/M |
1. Suggested the installation of Світлодіодні стрічки COB to be made by the manufacturer, agent, or other qualified people.
2. Please study the above specification before installation.
3. The above data is based on our standard product. Please subject to your actual product data if there is a slight difference.
4. The above schematic diagrams are from our standard product. Please subject to your existing product if there is a slight difference.
5. The LED driver wattage must be at least 1.2 times the overall wattage of the LED strips used for the power supply.
6. For safety, do not connect the strips directly to the AC.
7. Any acidic or alkaline substance is forbidden.
8. No prior notice in case this product or specification is updated.
9. Юнітоп залишає за собою остаточне право на пояснення вищезазначеної специфікації.
Because the PCB which we used on this COB LED strip is only 4mm width which is super narrow. There are always some areas which do not have too much space and you have to use very tiny COB LED strips. Then this is the perfect solution.
COB LED strip with 480LEDs/M, 4mm width PCB
Ultra Thin COB LED Strip With 480LEDs/M, 6mm Width PCB
